andreas. faucet design. February 20th , 2018.
If you wash a lot of large pots, fill vases often or have a big roomy sink a high arc faucet is probably for you. High-arc, also known as gooseneck or high neck faucets, give you more room to work. Today′s high arc kitchen faucets often have beautiful flowing curves and tapered handles and could easily be the focal point of a kitchen. These faucets are best used in deep sinks, they will cause splashing if the sink is shallow. Most bar sink faucets are of the high arc type to allow as much room as possible for washing produce.
Second - Disassemble the Faucet: The same basic principals apply to all faucet types when starting to take a faucet apart for repair or replacement. Keep all parts and layout in the order you take them apart. This will help you both put the faucet back together and identify the parts to be replaced. See below for specific variations in faucet dis-assembly.
Compression Style Faucets - this design is used for many double-handle faucets and is the old-fashioned style faucet (when shutting the faucet off, you usually can feel the rubber washer being squeezed inside the faucet.) Compression faucets have separate controls for hot and cold water and can be identified by the threaded stem assemblies inside the faucet body. Compression faucets all have washers or seals which control water flow and need to be replaced regularly over time. The replacement parts are inexpensive and easy to replace.
Apart of that, you may want to know how long a distance the wand retracts from. On some faucets, the wand will come back to the dock from any point where you release it. Others will need to be brought close to the dock to activate the forces that pull it in.