faucet design. Tuesday , February 20th , 2018 - 17:05:32 PM
If a cat touches your touch sensitive faucet, it will, most likely, be too long a contact for the faucet to turn on. A canary landing on the faucet won′t activate it either. Well, how likely is a situation when your kitten would be sitting there and touching the faucet with its paw? Situations of this kind are extremely unlikely to happen. But even if they do once in a while, a good faucet has a built-in system that turns the water off automatically after a certain period of inactivity. It is usually configured somewhere between 3 and 5 minutes. So even if the faucet gets turned on by some unusual circumstance, the loss from that will be rather insignificant.
Before performing this maintenance you should find out if the reason the faucet is leaking is because it was frozen and parts on the inside may be damaged. frost free hose bibs may freeze during freezing temperatures if a hose is left attached to it or if the hose bib is installed with the slope of the hose bib sloping in toward the house. Both conditions prevent the hose bib from draining when it is shut off and then when freezing temperatures happen the hose bib freezes up and is damaged. This article teaches you how to recognize problems with leaky frost free hose bibs and fix them.
To disassemble unscrew the setscrew and pull off handle. Though these faucets are washerless, they do have inlet and outlet seals that may leak, or sediment may build up inside the inlets and cause leaks. After removing the escutcheon cap, lift out the cylinder and clean the neoprene seals and cylinder openings. Be sure the faucet is in the "open" position when replacing seals.