faucet design. Tuesday , February 20th , 2018 - 17:14:52 PM
Compression Style Faucets - this design is used for many double-handle faucets and is the old-fashioned style faucet (when shutting the faucet off, you usually can feel the rubber washer being squeezed inside the faucet.) Compression faucets have separate controls for hot and cold water and can be identified by the threaded stem assemblies inside the faucet body. Compression faucets all have washers or seals which control water flow and need to be replaced regularly over time. The replacement parts are inexpensive and easy to replace.
Disc Faucet - a top-quality fixture, the disc faucet has a single handle and is identified by the wide cylinder by the faucet body. The cylinder contains a pair of closely fitting ceramic discs that regulate the water flow: a movable upper disc turns or lifts and lowers against a fixed lower ceramic disc. Most ceramic disc faucets don′t drip or leak because they′re made to be almost maintenance free. Dripping at the spout occurs when the neoprene seals or cylinder openings are dirty. If the faucet continues to leak after cleaning, then install a new cylinder.
Once you have the faucet out, replace all rubber washers and o-rings. When replacing washers, check the condition of the metal valve seats inside the faucet body. If the valve seats feel rough, they should be replaced or resurfaced.