faucet design. Tuesday , February 20th , 2018 - 17:46:04 PM
Somewhere deep inside, many people would have loved a touch sensitive faucet in their kitchen. However, the ability of a faucet to turn on with just a light touch may sound too tricky, unbalanced, unpredictable and uncontrollable. What if there are young children or pets in the kitchen that can activate the faucet by accident? The most widespread reason for rejecting touch sensitive faucets is just the fear that it may not be suitable for families with children or pets.
To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.
To disassemble unscrew and pull off handle. To release the cartridge, use a pair of pliers to pull the retainer clip straight out. Pull out the cartridge and replace the o-rings and seals to fix leaks. You may need to replace the entire cartridge-it is an easy repair that will fix the majority of cartridge faucet leaks. Faucet cartridge come in many styles, so bring the old cartridge to the store. Be sure to insert the new cartridge so it is aligned in the same way as the old cartridge. If the hot and cold are reversed, take the faucet apart and rotate 180 degrees.