faucet design. Wednesday , February 21st , 2018 - 19:07:50 PM
To disassemble unscrew and pull off handle. To release the cartridge, use a pair of pliers to pull the retainer clip straight out. Pull out the cartridge and replace the o-rings and seals to fix leaks. You may need to replace the entire cartridge-it is an easy repair that will fix the majority of cartridge faucet leaks. Faucet cartridge come in many styles, so bring the old cartridge to the store. Be sure to insert the new cartridge so it is aligned in the same way as the old cartridge. If the hot and cold are reversed, take the faucet apart and rotate 180 degrees.
Second - Disassemble the Faucet: The same basic principals apply to all faucet types when starting to take a faucet apart for repair or replacement. Keep all parts and layout in the order you take them apart. This will help you both put the faucet back together and identify the parts to be replaced. See below for specific variations in faucet dis-assembly.
Ball-style Faucet - this washerless faucet has a single handle and is identified by the hollow metal or plastic ball inside the faucet body which controls water temperature and flow. Many have a rounded cap with knurled edges located under the faucet handle. Dripping at the faucet spout is caused by worn valve seats, springs, or a damaged ball. Leaks around the base of the faucet are caused by worn o-rings.