faucet design. Wednesday , February 21st , 2018 - 19:08:20 PM
To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.
Some use strong magnets that do a good job to hold the wand in the dock. Others use a smart combination of weights, extremely precise docks and flexible hoses. Whatever the method used in the faucet to keep the spray wand in its place, it might be wise to consult the users′ feedback to see if there are problems with loose fit.
Important: After making repairs to a disc faucet, it is imperative the handle in the ON position, then open the shutoff valves slowly. The ceramic discs can be cracked by the sudden release of air from the faucet. Once the water is running steadily, it is safe to close the faucet.