faucet design. Wednesday , February 21st , 2018 - 19:11:19 PM
The faucets with detachable spray wands have become extremely popular during the last decades. But there is always some doubt whether the pull-out wand will have a snug enough fit into its dock. If the wand does not sit very well, the faucet loses a lot. It can be beautifully designed, but if the spray head does not sit where it should, the whole faucet will look cheap and inferior. That is why the leading manufacturers of kitchen faucets have done their best to secure the wand firmly in its place.
Once you have the faucet out, replace all rubber washers and o-rings. When replacing washers, check the condition of the metal valve seats inside the faucet body. If the valve seats feel rough, they should be replaced or resurfaced.
If you have never held a wrench in your hand, you probably do need a plumber to help you with the installation. But if you know how to connect an end of a pipe to the supply, you can do all the things on your own. Every faucet that is worth your attention will come with detailed instructions. But the process is highly intuitive, too. Basically, the lower part of the faucet comes through the installation hole on your sink or counter-top, hot and cold water pipes connected and the faucet fastened with nuts from beneath.