faucet design. Wednesday , February 21st , 2018 - 19:36:02 PM
It is quite obvious that the touch feature is powered by electricity. Sometimes people ask whether the faucets need to be connected to the mains. They think it might be dangerous. Others mistrust the very idea of electricity and water being together in a faucet. In fact, the touch sensitive faucets are powered by a set of four or six 1.5 V batteries. The voltage reached by such a pack does not exceed 9 volts, which is considered safe voltage even by the strictest regulations. The electricity, however weak, never comes in contact with water. In a typical touch sensitive faucet, water runs inside pipes made from non-conductive materials. So there is no threat whatsoever that could be attributed to the use of electricity in touch sensitive faucets.
But there are faucets on which the spots will be much less visible and easier to clean. You only have to find a faucet with a surface designed especially for the clean look. If you do an online research, you can find references to such a feature in the descriptions that are available on the manufacturers′ or retailers′ sites. If you find a site that does not offer you a detailed description, it is a good reason for you to leave that site. There are a lot of customer oriented sites on the Internet that supply even more information about the items they feature than you can possibly get at your offline store.
Ball-style Faucet - this washerless faucet has a single handle and is identified by the hollow metal or plastic ball inside the faucet body which controls water temperature and flow. Many have a rounded cap with knurled edges located under the faucet handle. Dripping at the faucet spout is caused by worn valve seats, springs, or a damaged ball. Leaks around the base of the faucet are caused by worn o-rings.