faucet design. Wednesday , February 21st , 2018 - 19:42:03 PM
If a cat touches your touch sensitive faucet, it will, most likely, be too long a contact for the faucet to turn on. A canary landing on the faucet won′t activate it either. Well, how likely is a situation when your kitten would be sitting there and touching the faucet with its paw? Situations of this kind are extremely unlikely to happen. But even if they do once in a while, a good faucet has a built-in system that turns the water off automatically after a certain period of inactivity. It is usually configured somewhere between 3 and 5 minutes. So even if the faucet gets turned on by some unusual circumstance, the loss from that will be rather insignificant.
To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.
The faucets with detachable spray wands have become extremely popular during the last decades. But there is always some doubt whether the pull-out wand will have a snug enough fit into its dock. If the wand does not sit very well, the faucet loses a lot. It can be beautifully designed, but if the spray head does not sit where it should, the whole faucet will look cheap and inferior. That is why the leading manufacturers of kitchen faucets have done their best to secure the wand firmly in its place.