faucet design. Thursday , February 22nd , 2018 - 16:18:48 PM
It is quite obvious that the touch feature is powered by electricity. Sometimes people ask whether the faucets need to be connected to the mains. They think it might be dangerous. Others mistrust the very idea of electricity and water being together in a faucet. In fact, the touch sensitive faucets are powered by a set of four or six 1.5 V batteries. The voltage reached by such a pack does not exceed 9 volts, which is considered safe voltage even by the strictest regulations. The electricity, however weak, never comes in contact with water. In a typical touch sensitive faucet, water runs inside pipes made from non-conductive materials. So there is no threat whatsoever that could be attributed to the use of electricity in touch sensitive faucets.
The faucets with detachable spray wands have become extremely popular during the last decades. But there is always some doubt whether the pull-out wand will have a snug enough fit into its dock. If the wand does not sit very well, the faucet loses a lot. It can be beautifully designed, but if the spray head does not sit where it should, the whole faucet will look cheap and inferior. That is why the leading manufacturers of kitchen faucets have done their best to secure the wand firmly in its place.
Disc Faucet - a top-quality fixture, the disc faucet has a single handle and is identified by the wide cylinder by the faucet body. The cylinder contains a pair of closely fitting ceramic discs that regulate the water flow: a movable upper disc turns or lifts and lowers against a fixed lower ceramic disc. Most ceramic disc faucets don′t drip or leak because they′re made to be almost maintenance free. Dripping at the spout occurs when the neoprene seals or cylinder openings are dirty. If the faucet continues to leak after cleaning, then install a new cylinder.