benjamin. faucet design. February 22nd , 2018.
Once you have the faucet out, replace all rubber washers and o-rings. When replacing washers, check the condition of the metal valve seats inside the faucet body. If the valve seats feel rough, they should be replaced or resurfaced.
Apart of that, you may want to know how long a distance the wand retracts from. On some faucets, the wand will come back to the dock from any point where you release it. Others will need to be brought close to the dock to activate the forces that pull it in.
It can be cheap because it is very basic but still good-looking and reliable. In this case, there is no problem. But beware of too low-priced faucets that offer you a ton of advanced features like pull-out spray wand, fingertip operation of the handle or even touch sensitivity. If your faith is strong enough, such can serve you well for some time, but I fear to make a guess how long or short it can be.
First - Determine Faucet Design: There are four basic faucet designs: ball-style, cartridge, disc, and compression. Sometimes a faucet type can be determined by the outer appearance, but often the faucet must be taken apart to identify what kind of faucet it is. The four faucet designs come under two categories: washer and washer-less.