faucet design. Thursday , February 22nd , 2018 - 18:30:33 PM
The benefits that touch sensitive faucets bring to families with young children can be somewhat counter intuitive. The most common reaction is fear that the faucet will be turned on and left running too often. But in real life, that is seldom the case. For a number of reasons, these faucets have turned out to be much more convenient for use in families with children than the non-sensitive ones. First and foremost, it is the ease of access to water that touch faucets secure for the children who are just learning how to use a faucet. When they need water, they do not have to reach the handle and operate it. They only need to reach any part of the faucet and touch it to get the water running. This relieves parents and adds fun for the children whilst helping them learn more quickly. When it comes to leaving the water running, just imagine how much easier it is for the children to turn the water off with just a touch than operating the handle to the off position. It is also a good deal of fun to turn the faucet off by touching it. So it′s no wonder that the touch sensitive faucets are left running much less frequently.
To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.
To disassemble unscrew the setscrew and pull off handle. Though these faucets are washerless, they do have inlet and outlet seals that may leak, or sediment may build up inside the inlets and cause leaks. After removing the escutcheon cap, lift out the cylinder and clean the neoprene seals and cylinder openings. Be sure the faucet is in the "open" position when replacing seals.