derbyan. faucet design. February 22nd , 2018.
On the other hand, if it is one of the fears described below that stops you from having a touch sensitive kitchen faucet, then think again. You just need to find a good model that has already proved to be reliable in other people′s kitchens.
Ball-style Faucet - this washerless faucet has a single handle and is identified by the hollow metal or plastic ball inside the faucet body which controls water temperature and flow. Many have a rounded cap with knurled edges located under the faucet handle. Dripping at the faucet spout is caused by worn valve seats, springs, or a damaged ball. Leaks around the base of the faucet are caused by worn o-rings.
The decision may be tough at times. But it does not have to be like buying a pig in a poke. With a little research, you can find a lot of useful feedback from existing users about how the touch sensitivity works in different kitchen faucets. Some faucets have tens, if not hundreds, of reviews on the largest online vendor websites like Amazon. The number of reviews and the ratings given can be a good indication of the quality of the faucet. You can see if there are a lot of people having issues with the touch sensitivity in a particular faucet.
To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.