faucet design. Friday , February 23rd , 2018 - 14:20:43 PM
The faucets with detachable spray wands have become extremely popular during the last decades. But there is always some doubt whether the pull-out wand will have a snug enough fit into its dock. If the wand does not sit very well, the faucet loses a lot. It can be beautifully designed, but if the spray head does not sit where it should, the whole faucet will look cheap and inferior. That is why the leading manufacturers of kitchen faucets have done their best to secure the wand firmly in its place.
One of the first things to know before shopping for a faucet is your hole configuration. Most sinks come with holes drilled to receive the faucet and sometimes accessories such as a sprayer, soap dispenser, hot beverage or filtered water faucet. One hole sinks are for single-control faucets, three hole are for single-control faucets with a sprayer and/or accessories and four holes are for single-control or two-handle sinks with various accessories. If you have an under-mount or apron front sink the holes are drilled into the countertop behind the sink.
Pullout faucets have a spray head that pulls out towards you, whereas a pull-down faucet has a spray head that pulls down toward the bottom of the sink. Both options help you clean the sink and wash produce or water plants. The pull-outs are the fastest growing in popularity of any faucet in the industry with good reason, they are the perfect combination of style and function. A button or toggle control makes it easy to go from aerated stream to spray. Look for one that swivels 360 degrees for easy access to all areas of your sink.