faucet design. Thursday , February 22nd , 2018 - 22:14:07 PM
One of the first things to know before shopping for a faucet is your hole configuration. Most sinks come with holes drilled to receive the faucet and sometimes accessories such as a sprayer, soap dispenser, hot beverage or filtered water faucet. One hole sinks are for single-control faucets, three hole are for single-control faucets with a sprayer and/or accessories and four holes are for single-control or two-handle sinks with various accessories. If you have an under-mount or apron front sink the holes are drilled into the countertop behind the sink.
Of all the fixtures and appliances the kitchen faucet is probably the one we use the most. According to faucet manufacturer KWC, the average family uses the kitchen faucet more than 40 times a day. Whether it′s hand washing, rinsing off dishes, filling a pasta pot or washing vegetables, the kitchen faucet gets a real workout every day. So when it′s time to buy a new faucet you need to know how to choose one that will do it′s job and will keep doing it for years to come. But, not to worry, this guide should take much of the fear and loathing out of selecting a new faucet.
Ball-style Faucet - this washerless faucet has a single handle and is identified by the hollow metal or plastic ball inside the faucet body which controls water temperature and flow. Many have a rounded cap with knurled edges located under the faucet handle. Dripping at the faucet spout is caused by worn valve seats, springs, or a damaged ball. Leaks around the base of the faucet are caused by worn o-rings.