faucet design. Friday , February 23rd , 2018 - 14:42:41 PM
Cartridge Faucet - this washerless faucet is identified by the narrow metal or plastic cartridge inside the faucet body; and it is available in both single and double handled cartridge designs. Cartridge faucets have a hollow cartridge insert that lifts and rotates to control the flow and temperature of water. Dripping at the spout occurs when the cartridge seals wear out. Leaks at the base are caused by worn o-rings.
Pullout faucets have a spray head that pulls out towards you, whereas a pull-down faucet has a spray head that pulls down toward the bottom of the sink. Both options help you clean the sink and wash produce or water plants. The pull-outs are the fastest growing in popularity of any faucet in the industry with good reason, they are the perfect combination of style and function. A button or toggle control makes it easy to go from aerated stream to spray. Look for one that swivels 360 degrees for easy access to all areas of your sink.
Compression Style Faucets - this design is used for many double-handle faucets and is the old-fashioned style faucet (when shutting the faucet off, you usually can feel the rubber washer being squeezed inside the faucet.) Compression faucets have separate controls for hot and cold water and can be identified by the threaded stem assemblies inside the faucet body. Compression faucets all have washers or seals which control water flow and need to be replaced regularly over time. The replacement parts are inexpensive and easy to replace.