andreas. faucet design. February 23rd , 2018.
Faucets begin to drip when washers, o-rings, or seals inside the faucet are dirty with sediment, covered with mineral deposits, or just worn-out. Fixing a faucet is fairly easy, but varies depending on the type of faucet you have (see below for specific description and instructions). Once you know your faucet design, you can properly disassemble the faucet, locate the source of the leak, and then replace the worn parts or clean dirty parts.
Some use strong magnets that do a good job to hold the wand in the dock. Others use a smart combination of weights, extremely precise docks and flexible hoses. Whatever the method used in the faucet to keep the spray wand in its place, it might be wise to consult the users′ feedback to see if there are problems with loose fit.
If you wash a lot of large pots, fill vases often or have a big roomy sink a high arc faucet is probably for you. High-arc, also known as gooseneck or high neck faucets, give you more room to work. Today′s high arc kitchen faucets often have beautiful flowing curves and tapered handles and could easily be the focal point of a kitchen. These faucets are best used in deep sinks, they will cause splashing if the sink is shallow. Most bar sink faucets are of the high arc type to allow as much room as possible for washing produce.
Much is lost from the elegant look when water spots or fingerprints are too explicitly visible on the surface of the faucet. They can be really annoying when you need to keep watch and clean them many times a day. All faucets everywhere in the world will be exposed to this nuisance to a certain extent, and cleaning is the only remedy.