faucet design. Friday , February 23rd , 2018 - 15:32:22 PM
Of all the fixtures and appliances the kitchen faucet is probably the one we use the most. According to faucet manufacturer KWC, the average family uses the kitchen faucet more than 40 times a day. Whether it′s hand washing, rinsing off dishes, filling a pasta pot or washing vegetables, the kitchen faucet gets a real workout every day. So when it′s time to buy a new faucet you need to know how to choose one that will do it′s job and will keep doing it for years to come. But, not to worry, this guide should take much of the fear and loathing out of selecting a new faucet.
One of the first things to know before shopping for a faucet is your hole configuration. Most sinks come with holes drilled to receive the faucet and sometimes accessories such as a sprayer, soap dispenser, hot beverage or filtered water faucet. One hole sinks are for single-control faucets, three hole are for single-control faucets with a sprayer and/or accessories and four holes are for single-control or two-handle sinks with various accessories. If you have an under-mount or apron front sink the holes are drilled into the countertop behind the sink.
If you wash a lot of large pots, fill vases often or have a big roomy sink a high arc faucet is probably for you. High-arc, also known as gooseneck or high neck faucets, give you more room to work. Today′s high arc kitchen faucets often have beautiful flowing curves and tapered handles and could easily be the focal point of a kitchen. These faucets are best used in deep sinks, they will cause splashing if the sink is shallow. Most bar sink faucets are of the high arc type to allow as much room as possible for washing produce.