faucet design. Friday , February 23rd , 2018 - 15:34:00 PM
One of the first things to know before shopping for a faucet is your hole configuration. Most sinks come with holes drilled to receive the faucet and sometimes accessories such as a sprayer, soap dispenser, hot beverage or filtered water faucet. One hole sinks are for single-control faucets, three hole are for single-control faucets with a sprayer and/or accessories and four holes are for single-control or two-handle sinks with various accessories. If you have an under-mount or apron front sink the holes are drilled into the countertop behind the sink.
Compression Style Faucets - this design is used for many double-handle faucets and is the old-fashioned style faucet (when shutting the faucet off, you usually can feel the rubber washer being squeezed inside the faucet.) Compression faucets have separate controls for hot and cold water and can be identified by the threaded stem assemblies inside the faucet body. Compression faucets all have washers or seals which control water flow and need to be replaced regularly over time. The replacement parts are inexpensive and easy to replace.
To disassemble unscrew and pull off handle. To release the cartridge, use a pair of pliers to pull the retainer clip straight out. Pull out the cartridge and replace the o-rings and seals to fix leaks. You may need to replace the entire cartridge-it is an easy repair that will fix the majority of cartridge faucet leaks. Faucet cartridge come in many styles, so bring the old cartridge to the store. Be sure to insert the new cartridge so it is aligned in the same way as the old cartridge. If the hot and cold are reversed, take the faucet apart and rotate 180 degrees.