faucet design. Friday , February 23rd , 2018 - 15:36:13 PM
Cartridge Faucet - this washerless faucet is identified by the narrow metal or plastic cartridge inside the faucet body; and it is available in both single and double handled cartridge designs. Cartridge faucets have a hollow cartridge insert that lifts and rotates to control the flow and temperature of water. Dripping at the spout occurs when the cartridge seals wear out. Leaks at the base are caused by worn o-rings.
To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.
But there are faucets on which the spots will be much less visible and easier to clean. You only have to find a faucet with a surface designed especially for the clean look. If you do an online research, you can find references to such a feature in the descriptions that are available on the manufacturers′ or retailers′ sites. If you find a site that does not offer you a detailed description, it is a good reason for you to leave that site. There are a lot of customer oriented sites on the Internet that supply even more information about the items they feature than you can possibly get at your offline store.