faucet design. Friday , February 23rd , 2018 - 15:45:08 PM
To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.
Once you have the faucet out, replace all rubber washers and o-rings. When replacing washers, check the condition of the metal valve seats inside the faucet body. If the valve seats feel rough, they should be replaced or resurfaced.
Somewhere deep inside, many people would have loved a touch sensitive faucet in their kitchen. However, the ability of a faucet to turn on with just a light touch may sound too tricky, unbalanced, unpredictable and uncontrollable. What if there are young children or pets in the kitchen that can activate the faucet by accident? The most widespread reason for rejecting touch sensitive faucets is just the fear that it may not be suitable for families with children or pets.