felicia. faucet design. February 23rd , 2018.
The cleverly engineered touch sensitivity system distinguishes between "touch" and "grip". When you tap it, your hand needs to be removed from the faucet within a fraction of a second. If the hand stays on the faucet, it is identified as a "grip", and the faucet does not respond. So it is practically impossible for pets to activate it.
Much is lost from the elegant look when water spots or fingerprints are too explicitly visible on the surface of the faucet. They can be really annoying when you need to keep watch and clean them many times a day. All faucets everywhere in the world will be exposed to this nuisance to a certain extent, and cleaning is the only remedy.
To disassemble unscrew the setscrew and pull off handle. Though these faucets are washerless, they do have inlet and outlet seals that may leak, or sediment may build up inside the inlets and cause leaks. After removing the escutcheon cap, lift out the cylinder and clean the neoprene seals and cylinder openings. Be sure the faucet is in the "open" position when replacing seals.
Faucets begin to drip when washers, o-rings, or seals inside the faucet are dirty with sediment, covered with mineral deposits, or just worn-out. Fixing a faucet is fairly easy, but varies depending on the type of faucet you have (see below for specific description and instructions). Once you know your faucet design, you can properly disassemble the faucet, locate the source of the leak, and then replace the worn parts or clean dirty parts.