andreas faucet design, 2018-02-23 16:50:49. Pullout faucets have a spray head that pulls out towards you, whereas a pull-down faucet has a spray head that pulls down toward the bottom of the sink. Both options help you clean the sink and wash produce or water plants. The pull-outs are the fastest growing in popularity of any faucet in the industry with good reason, they are the perfect combination of style and function. A button or toggle control makes it easy to go from aerated stream to spray. Look for one that swivels 360 degrees for easy access to all areas of your sink.
felicia faucet design, 2017-12-10 20:41:15. But when there are small children, the touch function comes in particularly handy. It is easier for them to get the water they need without asking adults for help. They don′t need to reach the handle and operate it. All they need to do is to tap somewhere on the faucet. It is not likely either that they would leave the water running. It has been found that children often find it fun to tap on the faucet to turn the water off.
benjamin faucet design, 2017-12-11 20:40:41. In fact, you will be surprised to find how low the price is for which you can get a beautiful kitchen faucet with a lot of helpful features. The word of wisdom says, "He pays a lot who buys cheap", and to a certain degree that still applies. If you consider purchasing a faucet below $ 80, you might want to find an answer to a question, what makes it that cheap.
celindion faucet design, 2017-12-07 07:16:23. Cartridge Faucet - this washerless faucet is identified by the narrow metal or plastic cartridge inside the faucet body; and it is available in both single and double handled cartridge designs. Cartridge faucets have a hollow cartridge insert that lifts and rotates to control the flow and temperature of water. Dripping at the spout occurs when the cartridge seals wear out. Leaks at the base are caused by worn o-rings.
andreas faucet design, 2017-12-12 20:40:36. To disassemble unscrew the bonnet from the faucet, using slip-joint pliers. Remove the valve stem, keeping in mind this has reverse threads, so unscrew it by turning it clockwise. Older compression faucets may have corroded handles that can be difficult to remove. Most hardware stores and rental centers have a specialty tool called a Handle Puller which makes the job easier.
derbyan faucet design, 2017-12-13 20:39:19. To disassemble unscrew the bonnet from the faucet, using slip-joint pliers. Remove the valve stem, keeping in mind this has reverse threads, so unscrew it by turning it clockwise. Older compression faucets may have corroded handles that can be difficult to remove. Most hardware stores and rental centers have a specialty tool called a Handle Puller which makes the job easier.
benjamin faucet design, 2017-12-09 20:41:20. One of the first things to know before shopping for a faucet is your hole configuration. Most sinks come with holes drilled to receive the faucet and sometimes accessories such as a sprayer, soap dispenser, hot beverage or filtered water faucet. One hole sinks are for single-control faucets, three hole are for single-control faucets with a sprayer and/or accessories and four holes are for single-control or two-handle sinks with various accessories. If you have an under-mount or apron front sink the holes are drilled into the countertop behind the sink.
celindion faucet design, 2017-12-08 20:41:28. Ball-style Faucet - this washerless faucet has a single handle and is identified by the hollow metal or plastic ball inside the faucet body which controls water temperature and flow. Many have a rounded cap with knurled edges located under the faucet handle. Dripping at the faucet spout is caused by worn valve seats, springs, or a damaged ball. Leaks around the base of the faucet are caused by worn o-rings.