andreas faucet design, 2018-02-23 16:50:49. Ball-style Faucet - this washerless faucet has a single handle and is identified by the hollow metal or plastic ball inside the faucet body which controls water temperature and flow. Many have a rounded cap with knurled edges located under the faucet handle. Dripping at the faucet spout is caused by worn valve seats, springs, or a damaged ball. Leaks around the base of the faucet are caused by worn o-rings.
derbyan faucet design, 2018-02-23 16:05:32. Single handle faucets still make up more than 80% of faucet sales and are popular with builders. These faucets are basic and have a single handle that controls temperature and flow. These are available with a side spray which is much less expensive than the pull-out spray faucets. They also allow you to have a spray with a vintage-look faucet.
celindion faucet design, 2018-02-23 15:56:10. A small drip from a leaky faucet might seem like a little annoyance, yet it actually can cost you hundreds of dollars a year in water down the drain and next to nothing to fix. A leaky faucet is one of the most common home plumbing problems. Faucets are relatively easy to fix-once you know how they work and what to do to fix them.
andreas faucet design, 2018-02-23 16:07:35. One of the first things to know before shopping for a faucet is your hole configuration. Most sinks come with holes drilled to receive the faucet and sometimes accessories such as a sprayer, soap dispenser, hot beverage or filtered water faucet. One hole sinks are for single-control faucets, three hole are for single-control faucets with a sprayer and/or accessories and four holes are for single-control or two-handle sinks with various accessories. If you have an under-mount or apron front sink the holes are drilled into the countertop behind the sink.
felicia faucet design, 2018-02-23 16:08:36. Cartridge Faucet - this washerless faucet is identified by the narrow metal or plastic cartridge inside the faucet body; and it is available in both single and double handled cartridge designs. Cartridge faucets have a hollow cartridge insert that lifts and rotates to control the flow and temperature of water. Dripping at the spout occurs when the cartridge seals wear out. Leaks at the base are caused by worn o-rings.
celindion faucet design, 2018-02-23 16:08:10. The cleverly engineered touch sensitivity system distinguishes between "touch" and "grip". When you tap it, your hand needs to be removed from the faucet within a fraction of a second. If the hand stays on the faucet, it is identified as a "grip", and the faucet does not respond. So it is practically impossible for pets to activate it.
benjamin faucet design, 2018-02-23 16:06:37. It can be cheap because it is very basic but still good-looking and reliable. In this case, there is no problem. But beware of too low-priced faucets that offer you a ton of advanced features like pull-out spray wand, fingertip operation of the handle or even touch sensitivity. If your faith is strong enough, such can serve you well for some time, but I fear to make a guess how long or short it can be.
derbyan faucet design, 2018-02-23 16:07:05. It is quite obvious that the touch feature is powered by electricity. Sometimes people ask whether the faucets need to be connected to the mains. They think it might be dangerous. Others mistrust the very idea of electricity and water being together in a faucet. In fact, the touch sensitive faucets are powered by a set of four or six 1.5 V batteries. The voltage reached by such a pack does not exceed 9 volts, which is considered safe voltage even by the strictest regulations. The electricity, however weak, never comes in contact with water. In a typical touch sensitive faucet, water runs inside pipes made from non-conductive materials. So there is no threat whatsoever that could be attributed to the use of electricity in touch sensitive faucets.