andreas faucet design, 2018-02-23 16:50:49. Second - Disassemble the Faucet: The same basic principals apply to all faucet types when starting to take a faucet apart for repair or replacement. Keep all parts and layout in the order you take them apart. This will help you both put the faucet back together and identify the parts to be replaced. See below for specific variations in faucet dis-assembly.
benjamin faucet design, 2018-02-21 15:58:00. Disc Faucet - a top-quality fixture, the disc faucet has a single handle and is identified by the wide cylinder by the faucet body. The cylinder contains a pair of closely fitting ceramic discs that regulate the water flow: a movable upper disc turns or lifts and lowers against a fixed lower ceramic disc. Most ceramic disc faucets don′t drip or leak because they′re made to be almost maintenance free. Dripping at the spout occurs when the neoprene seals or cylinder openings are dirty. If the faucet continues to leak after cleaning, then install a new cylinder.
andreas faucet design, 2018-02-21 15:59:19. For modern faucets, the truth is quite opposite though. The touch function is reliable and under normal conditions always works as expected. These faucets cannot be activated by pets, and they are helpful for families with children.
andreas faucet design, 2018-02-21 16:09:52. To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.
felicia faucet design, 2018-02-21 15:58:39. Some use strong magnets that do a good job to hold the wand in the dock. Others use a smart combination of weights, extremely precise docks and flexible hoses. Whatever the method used in the faucet to keep the spray wand in its place, it might be wise to consult the users′ feedback to see if there are problems with loose fit.
celindion faucet design, 2018-02-21 16:07:49. For modern faucets, the truth is quite opposite though. The touch function is reliable and under normal conditions always works as expected. These faucets cannot be activated by pets, and they are helpful for families with children.
derbyan faucet design, 2018-02-21 16:08:17. The cleverly engineered touch sensitivity system distinguishes between "touch" and "grip". When you tap it, your hand needs to be removed from the faucet within a fraction of a second. If the hand stays on the faucet, it is identified as a "grip", and the faucet does not respond. So it is practically impossible for pets to activate it.
felicia faucet design, 2018-02-21 16:09:01. Cartridge Faucet - this washerless faucet is identified by the narrow metal or plastic cartridge inside the faucet body; and it is available in both single and double handled cartridge designs. Cartridge faucets have a hollow cartridge insert that lifts and rotates to control the flow and temperature of water. Dripping at the spout occurs when the cartridge seals wear out. Leaks at the base are caused by worn o-rings.