benjamin faucet design, 2017-12-11 20:40:41. Ball-style Faucet - this washerless faucet has a single handle and is identified by the hollow metal or plastic ball inside the faucet body which controls water temperature and flow. Many have a rounded cap with knurled edges located under the faucet handle. Dripping at the faucet spout is caused by worn valve seats, springs, or a damaged ball. Leaks around the base of the faucet are caused by worn o-rings.
celindion faucet design, 2018-02-21 19:16:52. Faucet manufacturers make several types of replacement kits for ball-type faucets; some kits have only the springs and neoprene valve seats, while better kits also have the cam and cam washer.
felicia faucet design, 2018-02-21 19:17:04. But even if the children forget to turn the water off, all touch sensitive faucets from reliable manufacturers come with security systems that turn the water off automatically after a certain period of inactivity.
andreas faucet design, 2018-02-21 19:16:59. But do these fears have substance? Haven′t the engineers and designers of the best touch sensitive kitchen faucets anticipated these situations? Do we still have to deny ourselves the liberating feeling of operation with a touch and choose a more basic faucet only because we are not sure it will live up to the expectations?
felicia faucet design, 2018-02-21 19:16:48. If a cat touches your touch sensitive faucet, it will, most likely, be too long a contact for the faucet to turn on. A canary landing on the faucet won′t activate it either. Well, how likely is a situation when your kitten would be sitting there and touching the faucet with its paw? Situations of this kind are extremely unlikely to happen. But even if they do once in a while, a good faucet has a built-in system that turns the water off automatically after a certain period of inactivity. It is usually configured somewhere between 3 and 5 minutes. So even if the faucet gets turned on by some unusual circumstance, the loss from that will be rather insignificant.
felicia faucet design, 2018-02-22 15:57:50. Compression Style Faucets - this design is used for many double-handle faucets and is the old-fashioned style faucet (when shutting the faucet off, you usually can feel the rubber washer being squeezed inside the faucet.) Compression faucets have separate controls for hot and cold water and can be identified by the threaded stem assemblies inside the faucet body. Compression faucets all have washers or seals which control water flow and need to be replaced regularly over time. The replacement parts are inexpensive and easy to replace.
benjamin faucet design, 2018-02-21 19:12:21. Once you have the faucet out, replace all rubber washers and o-rings. When replacing washers, check the condition of the metal valve seats inside the faucet body. If the valve seats feel rough, they should be replaced or resurfaced.
felicia faucet design, 2018-02-22 16:03:44. For pull-down models, the hose needs to be guided through the faucet body and spout, for touch sensitive models, there will be a battery pack that needs to be connected to the contacts.