andreas faucet design, 2018-02-23 16:49:41. Ball-style Faucet - this washerless faucet has a single handle and is identified by the hollow metal or plastic ball inside the faucet body which controls water temperature and flow. Many have a rounded cap with knurled edges located under the faucet handle. Dripping at the faucet spout is caused by worn valve seats, springs, or a damaged ball. Leaks around the base of the faucet are caused by worn o-rings.
derbyan faucet design, 2017-10-02 15:54:42. The supply of kitchen faucets is huge, and within that multitude, you need to find the one that is yours. It will certainly require some research. Technology has evolved a lot during the recent decades, and experts know that some ideas that may once have been true are now outdated. Here you have a collection of seven most widespread myths, and I hope that getting these things right will assist you in your research.
celindion faucet design, 2017-10-04 15:53:36. A small drip from a leaky faucet might seem like a little annoyance, yet it actually can cost you hundreds of dollars a year in water down the drain and next to nothing to fix. A leaky faucet is one of the most common home plumbing problems. Faucets are relatively easy to fix-once you know how they work and what to do to fix them.
felicia faucet design, 2017-11-02 15:37:03. If you wash a lot of large pots, fill vases often or have a big roomy sink a high arc faucet is probably for you. High-arc, also known as gooseneck or high neck faucets, give you more room to work. Today′s high arc kitchen faucets often have beautiful flowing curves and tapered handles and could easily be the focal point of a kitchen. These faucets are best used in deep sinks, they will cause splashing if the sink is shallow. Most bar sink faucets are of the high arc type to allow as much room as possible for washing produce.
benjamin faucet design, 2017-09-04 15:55:43. The faucets with detachable spray wands have become extremely popular during the last decades. But there is always some doubt whether the pull-out wand will have a snug enough fit into its dock. If the wand does not sit very well, the faucet loses a lot. It can be beautifully designed, but if the spray head does not sit where it should, the whole faucet will look cheap and inferior. That is why the leading manufacturers of kitchen faucets have done their best to secure the wand firmly in its place.
andreas faucet design, 2017-11-01 15:37:12. Somewhere deep inside, many people would have loved a touch sensitive faucet in their kitchen. However, the ability of a faucet to turn on with just a light touch may sound too tricky, unbalanced, unpredictable and uncontrollable. What if there are young children or pets in the kitchen that can activate the faucet by accident? The most widespread reason for rejecting touch sensitive faucets is just the fear that it may not be suitable for families with children or pets.
benjamin faucet design, 2017-10-03 15:53:58. Important: After making repairs to a disc faucet, it is imperative the handle in the ON position, then open the shutoff valves slowly. The ceramic discs can be cracked by the sudden release of air from the faucet. Once the water is running steadily, it is safe to close the faucet.
felicia faucet design, 2017-10-01 15:55:13. To disassemble unscrew and pull off handle. To release the cartridge, use a pair of pliers to pull the retainer clip straight out. Pull out the cartridge and replace the o-rings and seals to fix leaks. You may need to replace the entire cartridge-it is an easy repair that will fix the majority of cartridge faucet leaks. Faucet cartridge come in many styles, so bring the old cartridge to the store. Be sure to insert the new cartridge so it is aligned in the same way as the old cartridge. If the hot and cold are reversed, take the faucet apart and rotate 180 degrees.
Recent Posts
Categories
Monthly Archives