andreas faucet design, 2018-02-23 16:50:49. The benefits that touch sensitive faucets bring to families with young children can be somewhat counter intuitive. The most common reaction is fear that the faucet will be turned on and left running too often. But in real life, that is seldom the case. For a number of reasons, these faucets have turned out to be much more convenient for use in families with children than the non-sensitive ones. First and foremost, it is the ease of access to water that touch faucets secure for the children who are just learning how to use a faucet. When they need water, they do not have to reach the handle and operate it. They only need to reach any part of the faucet and touch it to get the water running. This relieves parents and adds fun for the children whilst helping them learn more quickly. When it comes to leaving the water running, just imagine how much easier it is for the children to turn the water off with just a touch than operating the handle to the off position. It is also a good deal of fun to turn the faucet off by touching it. So it′s no wonder that the touch sensitive faucets are left running much less frequently.
felicia faucet design, 2018-02-13 19:43:16. To disassemble unscrew and pull off handle. To release the cartridge, use a pair of pliers to pull the retainer clip straight out. Pull out the cartridge and replace the o-rings and seals to fix leaks. You may need to replace the entire cartridge-it is an easy repair that will fix the majority of cartridge faucet leaks. Faucet cartridge come in many styles, so bring the old cartridge to the store. Be sure to insert the new cartridge so it is aligned in the same way as the old cartridge. If the hot and cold are reversed, take the faucet apart and rotate 180 degrees.
benjamin faucet design, 2018-02-15 19:17:14. It is quite obvious that the touch feature is powered by electricity. Sometimes people ask whether the faucets need to be connected to the mains. They think it might be dangerous. Others mistrust the very idea of electricity and water being together in a faucet. In fact, the touch sensitive faucets are powered by a set of four or six 1.5 V batteries. The voltage reached by such a pack does not exceed 9 volts, which is considered safe voltage even by the strictest regulations. The electricity, however weak, never comes in contact with water. In a typical touch sensitive faucet, water runs inside pipes made from non-conductive materials. So there is no threat whatsoever that could be attributed to the use of electricity in touch sensitive faucets.
derbyan faucet design, 2018-02-20 16:43:37. Compression Style Faucets - this design is used for many double-handle faucets and is the old-fashioned style faucet (when shutting the faucet off, you usually can feel the rubber washer being squeezed inside the faucet.) Compression faucets have separate controls for hot and cold water and can be identified by the threaded stem assemblies inside the faucet body. Compression faucets all have washers or seals which control water flow and need to be replaced regularly over time. The replacement parts are inexpensive and easy to replace.
celindion faucet design, 2018-02-20 16:43:53. Uncontrolled operation is the main fear that makes people who would otherwise have chosen a touch sensitive faucet decide to have a non-sensitive one. It is easy to believe that such faucets are not suitable for families with young children or pets that stay in the kitchen.
celindion faucet design, 2018-02-14 19:42:54. For modern faucets, the truth is quite opposite though. The touch function is reliable and under normal conditions always works as expected. These faucets cannot be activated by pets, and they are helpful for families with children.
derbyan faucet design, 2018-02-16 19:17:08. Cartridge Faucet - this washerless faucet is identified by the narrow metal or plastic cartridge inside the faucet body; and it is available in both single and double handled cartridge designs. Cartridge faucets have a hollow cartridge insert that lifts and rotates to control the flow and temperature of water. Dripping at the spout occurs when the cartridge seals wear out. Leaks at the base are caused by worn o-rings.
benjamin faucet design, 2018-02-20 16:43:13. To disassemble unscrew and pull off handle. To release the cartridge, use a pair of pliers to pull the retainer clip straight out. Pull out the cartridge and replace the o-rings and seals to fix leaks. You may need to replace the entire cartridge-it is an easy repair that will fix the majority of cartridge faucet leaks. Faucet cartridge come in many styles, so bring the old cartridge to the store. Be sure to insert the new cartridge so it is aligned in the same way as the old cartridge. If the hot and cold are reversed, take the faucet apart and rotate 180 degrees.