faucet design. Friday , February 23rd , 2018 - 16:35:52 PM
Once you have the faucet out, replace all rubber washers and o-rings. When replacing washers, check the condition of the metal valve seats inside the faucet body. If the valve seats feel rough, they should be replaced or resurfaced.
Second - Disassemble the Faucet: The same basic principals apply to all faucet types when starting to take a faucet apart for repair or replacement. Keep all parts and layout in the order you take them apart. This will help you both put the faucet back together and identify the parts to be replaced. See below for specific variations in faucet dis-assembly.
Disc Faucet - a top-quality fixture, the disc faucet has a single handle and is identified by the wide cylinder by the faucet body. The cylinder contains a pair of closely fitting ceramic discs that regulate the water flow: a movable upper disc turns or lifts and lowers against a fixed lower ceramic disc. Most ceramic disc faucets don′t drip or leak because they′re made to be almost maintenance free. Dripping at the spout occurs when the neoprene seals or cylinder openings are dirty. If the faucet continues to leak after cleaning, then install a new cylinder.