derbyan. faucet design. February 23rd , 2018.
To disassemble unscrew the setscrew and pull off handle. Tighten the plastic adjusting ring inside the cap by turning it with a special flat adjusting tool-or fit tow screwdrivers into the slots and cross their blades to turn the ring. If your ball-style faucet with this type of cap is leaking from the spout, first try tightening the cap with channel pliers. Still leaking? Disassemble and replace worn/broken parts. Often you need to lift out the ball and replace the rubber seats and springs on both sides of the valve. If the faucet leaks around the spout, replace worn o-rings. Replace rotating ball only if clearly worn.
Second - Disassemble the Faucet: The same basic principals apply to all faucet types when starting to take a faucet apart for repair or replacement. Keep all parts and layout in the order you take them apart. This will help you both put the faucet back together and identify the parts to be replaced. See below for specific variations in faucet dis-assembly.
Much is lost from the elegant look when water spots or fingerprints are too explicitly visible on the surface of the faucet. They can be really annoying when you need to keep watch and clean them many times a day. All faucets everywhere in the world will be exposed to this nuisance to a certain extent, and cleaning is the only remedy.
In fact, you will be surprised to find how low the price is for which you can get a beautiful kitchen faucet with a lot of helpful features. The word of wisdom says, "He pays a lot who buys cheap", and to a certain degree that still applies. If you consider purchasing a faucet below $ 80, you might want to find an answer to a question, what makes it that cheap.