faucet design. Friday , February 23rd , 2018 - 16:40:27 PM
Compression Style Faucets - this design is used for many double-handle faucets and is the old-fashioned style faucet (when shutting the faucet off, you usually can feel the rubber washer being squeezed inside the faucet.) Compression faucets have separate controls for hot and cold water and can be identified by the threaded stem assemblies inside the faucet body. Compression faucets all have washers or seals which control water flow and need to be replaced regularly over time. The replacement parts are inexpensive and easy to replace.
Before performing this maintenance you should find out if the reason the faucet is leaking is because it was frozen and parts on the inside may be damaged. frost free hose bibs may freeze during freezing temperatures if a hose is left attached to it or if the hose bib is installed with the slope of the hose bib sloping in toward the house. Both conditions prevent the hose bib from draining when it is shut off and then when freezing temperatures happen the hose bib freezes up and is damaged. This article teaches you how to recognize problems with leaky frost free hose bibs and fix them.
Disc Faucet - a top-quality fixture, the disc faucet has a single handle and is identified by the wide cylinder by the faucet body. The cylinder contains a pair of closely fitting ceramic discs that regulate the water flow: a movable upper disc turns or lifts and lowers against a fixed lower ceramic disc. Most ceramic disc faucets don′t drip or leak because they′re made to be almost maintenance free. Dripping at the spout occurs when the neoprene seals or cylinder openings are dirty. If the faucet continues to leak after cleaning, then install a new cylinder.