faucet design. Friday , February 23rd , 2018 - 16:46:40 PM
Once you have the faucet out, replace all rubber washers and o-rings. When replacing washers, check the condition of the metal valve seats inside the faucet body. If the valve seats feel rough, they should be replaced or resurfaced.
Single handle faucets still make up more than 80% of faucet sales and are popular with builders. These faucets are basic and have a single handle that controls temperature and flow. These are available with a side spray which is much less expensive than the pull-out spray faucets. They also allow you to have a spray with a vintage-look faucet.
If you have never held a wrench in your hand, you probably do need a plumber to help you with the installation. But if you know how to connect an end of a pipe to the supply, you can do all the things on your own. Every faucet that is worth your attention will come with detailed instructions. But the process is highly intuitive, too. Basically, the lower part of the faucet comes through the installation hole on your sink or counter-top, hot and cold water pipes connected and the faucet fastened with nuts from beneath.