andreas. faucet design. February 23rd , 2018.
But when there are small children, the touch function comes in particularly handy. It is easier for them to get the water they need without asking adults for help. They don′t need to reach the handle and operate it. All they need to do is to tap somewhere on the faucet. It is not likely either that they would leave the water running. It has been found that children often find it fun to tap on the faucet to turn the water off.
If a cat touches your touch sensitive faucet, it will, most likely, be too long a contact for the faucet to turn on. A canary landing on the faucet won′t activate it either. Well, how likely is a situation when your kitten would be sitting there and touching the faucet with its paw? Situations of this kind are extremely unlikely to happen. But even if they do once in a while, a good faucet has a built-in system that turns the water off automatically after a certain period of inactivity. It is usually configured somewhere between 3 and 5 minutes. So even if the faucet gets turned on by some unusual circumstance, the loss from that will be rather insignificant.
Once you have the faucet out, replace all rubber washers and o-rings. When replacing washers, check the condition of the metal valve seats inside the faucet body. If the valve seats feel rough, they should be replaced or resurfaced.
Second - Disassemble the Faucet: The same basic principals apply to all faucet types when starting to take a faucet apart for repair or replacement. Keep all parts and layout in the order you take them apart. This will help you both put the faucet back together and identify the parts to be replaced. See below for specific variations in faucet dis-assembly.