faucet design. Friday , February 23rd , 2018 - 16:45:56 PM
Of all the fixtures and appliances the kitchen faucet is probably the one we use the most. According to faucet manufacturer KWC, the average family uses the kitchen faucet more than 40 times a day. Whether it′s hand washing, rinsing off dishes, filling a pasta pot or washing vegetables, the kitchen faucet gets a real workout every day. So when it′s time to buy a new faucet you need to know how to choose one that will do it′s job and will keep doing it for years to come. But, not to worry, this guide should take much of the fear and loathing out of selecting a new faucet.
If you have never held a wrench in your hand, you probably do need a plumber to help you with the installation. But if you know how to connect an end of a pipe to the supply, you can do all the things on your own. Every faucet that is worth your attention will come with detailed instructions. But the process is highly intuitive, too. Basically, the lower part of the faucet comes through the installation hole on your sink or counter-top, hot and cold water pipes connected and the faucet fastened with nuts from beneath.
Compression Style Faucets - this design is used for many double-handle faucets and is the old-fashioned style faucet (when shutting the faucet off, you usually can feel the rubber washer being squeezed inside the faucet.) Compression faucets have separate controls for hot and cold water and can be identified by the threaded stem assemblies inside the faucet body. Compression faucets all have washers or seals which control water flow and need to be replaced regularly over time. The replacement parts are inexpensive and easy to replace.