faucet design. Friday , February 23rd , 2018 - 16:47:35 PM
One of the first things to know before shopping for a faucet is your hole configuration. Most sinks come with holes drilled to receive the faucet and sometimes accessories such as a sprayer, soap dispenser, hot beverage or filtered water faucet. One hole sinks are for single-control faucets, three hole are for single-control faucets with a sprayer and/or accessories and four holes are for single-control or two-handle sinks with various accessories. If you have an under-mount or apron front sink the holes are drilled into the countertop behind the sink.
To disassemble unscrew the setscrew and pull off handle. Though these faucets are washerless, they do have inlet and outlet seals that may leak, or sediment may build up inside the inlets and cause leaks. After removing the escutcheon cap, lift out the cylinder and clean the neoprene seals and cylinder openings. Be sure the faucet is in the "open" position when replacing seals.
Before performing this maintenance you should find out if the reason the faucet is leaking is because it was frozen and parts on the inside may be damaged. frost free hose bibs may freeze during freezing temperatures if a hose is left attached to it or if the hose bib is installed with the slope of the hose bib sloping in toward the house. Both conditions prevent the hose bib from draining when it is shut off and then when freezing temperatures happen the hose bib freezes up and is damaged. This article teaches you how to recognize problems with leaky frost free hose bibs and fix them.