faucet design. Friday , February 23rd , 2018 - 16:46:49 PM
Pullout faucets have a spray head that pulls out towards you, whereas a pull-down faucet has a spray head that pulls down toward the bottom of the sink. Both options help you clean the sink and wash produce or water plants. The pull-outs are the fastest growing in popularity of any faucet in the industry with good reason, they are the perfect combination of style and function. A button or toggle control makes it easy to go from aerated stream to spray. Look for one that swivels 360 degrees for easy access to all areas of your sink.
It is quite obvious that the touch feature is powered by electricity. Sometimes people ask whether the faucets need to be connected to the mains. They think it might be dangerous. Others mistrust the very idea of electricity and water being together in a faucet. In fact, the touch sensitive faucets are powered by a set of four or six 1.5 V batteries. The voltage reached by such a pack does not exceed 9 volts, which is considered safe voltage even by the strictest regulations. The electricity, however weak, never comes in contact with water. In a typical touch sensitive faucet, water runs inside pipes made from non-conductive materials. So there is no threat whatsoever that could be attributed to the use of electricity in touch sensitive faucets.
The faucets with detachable spray wands have become extremely popular during the last decades. But there is always some doubt whether the pull-out wand will have a snug enough fit into its dock. If the wand does not sit very well, the faucet loses a lot. It can be beautifully designed, but if the spray head does not sit where it should, the whole faucet will look cheap and inferior. That is why the leading manufacturers of kitchen faucets have done their best to secure the wand firmly in its place.